Silicone Remover 200ml

• Removes PropOne Clear Coat
  
• Easy application – Brush on and coating will soften/gel within 30 minutes
  
• Does not contain toxic Dichloromethane and N-methylpyrrolidone
  
• Reduces dust and noise associated with mechanical grinding/sanding

Coverage: 15 sqm per litre (3 sqm per 200mL)

Application:

1. Remove all marine growth from surface.
2. Apply Silicone Remover approx. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling-wrap in hot/windy climates.
3. Do not allow remover to come in contact with water.
4. Leave in contact for 2-3 hours or until softened.
5. Remove with a stiff nylon or wire brush, scrubbing in a circular motion.
6. Wipe off any remaining residue with a xylene or toluene-soaked cloth.
7. If any coating remains after scraping, apply second coat.
8. Once done, proceed with Paint Stripper